The Raymarine RMK-9 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of Raymarine Multifunction Displays (MFDs) from any mounting location. The RMK-9 can be surface mounted or flush mounted, and includes key mats for either horizontal or vertical installation. S000018 Phụ Kiện Cho Máy Định Vị Đa Năng Số lượng: 1 Cái
Full control of your Raymarine Multifunction Display

The Raymarine RMK-9 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries and gS Series Multifunction Displays (MFDs) from any mounting location.

RMK 9 orientations

The fully backlit RMK-9 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness as well as Evolution autopilot control.

RMK-9 also features the same convenient Unicontroller with integrated joystick and rotary knob as found on cSeries and eSeries MFDs.

The RMK-9 can be surface mounted or flush mounted, and includes key mats for either horizontal or vertical installation. This gives you the flexibility to install the RMK-9 just about anywhere.


In chair 1
Flexible Mounting Options

The RMK-9 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-9 brings the system’s controls to you.

For the ultimate in convenience, mount the RMK-9 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.

RMK-9 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.


Networking and control

Utilising Raymarine’s RayNet high speed networking, the RMK-9 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-9 provides seamless control across all of the displays.

When used with aSeries or gS Series Multitouch displays, the RMK-9 brings full HybridTouch™ control capability to these products. The RMK-9 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated 100% by touch, 100% by keypad, or any variation in between.

gS Series Group
Raymarine RMK-9 Remote Control Specifications
  RMK 9KeyPad
  RMK-9 GENERAL SPECIFICATIONS
Dimensions
Dimensions (2)

Power

PoE class Class 1
Nominal supply voltage 12 / 24 V dc
Operating voltage range 10.8V dc to 31.2V dc
Power consumption 3.84W

Environmental

Operating temperature -25ºC to +55ºC (-13ºF to 131ºF)
Storage temperature -30ºC to +70ºC (-22ºF to 158ºF)
Relative humidity Maximum 75%
Waterproof rating IPX6

Wired connections

Network / power 1 x RayNet connector | (gS Series - 1000 Mb/s plus PoE) | (aSeries , cSeries, eSeries - 100 Mb/s)
Alternate power 1 x power connector

In the box

Typical box contents
In the box (1)
1 Keypad
2 Landscape keypad mat
3 Portrait keypad mat
4 Mounting gasket
5 4 x mounting fixings
6 Documentation pack
7 Right angled power cable 2m (6.6ft)
8 RayNet network cable 2m (6.6ft)
RMK-9 Remote Control User Manual & Documents
Raymarine RMK-9 Remote Ordering Information
RMK 9

The keypad can be mounted horizontally or vertically with a keypad mat for both orientations supplied.

Part Number Description
Part No Description
A80217 RMK-9 Keypad

RMK-9 Spares and Accessories

Part Number Description
Part No Description
R70185 Keypad mat spare (includes landscape and portrait keypad mat)
A06070 Right angled power cable
Various RayNet to RayNet Cables - view more details here
Various RayNet adapter cables - view more details here
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây