The Raymarine iTC-5 converts analog transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng.

Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

S000044 Instrument Accessories Số lượng: 1 Cái
Raymarine iTC-5 Instrument Transducer Converter
Transducer signals are easily converted to SeaTalkng
iTC 5 front  
 
iTC-5 Instrument Transducer Converter Features

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng

Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

Extended STng systems can support multiple iTC-5 units.

SeaTalkng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkng backbone.

Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).

If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers

  iTC 5 connections  
  TRANSDUCER CONNECTIONS
Item Description
1 Red - Speed and sea temperature transducer connection
2 Orange - Wind transducer and rotavecta connection
3 Yellow - Fluxgate Compass connection No longer supported
4 Green - Rudder reference transducer connection
5 Blue - Depth transducer connection
6 SeaTalkng backbone connection
7 SeaTalkng spur connection
8 Sea Talkng backbone connection

Possible systems

Note: In a SPX autopilot system the fluxgate compass and rudder reference transducer must be connected directly to the course computer and not the iTC-5.

  iTC 5 simple network  
  BASIC SEATALKNG SYSTEM WITH iTC-5
Part Number Description
1 ST70 Instrument display
2 2 x i70 Instrument displays
3 Terminated SeaTalkng T-piece connector
4 Terminated iTC-5
5 Rudder reference transducer
6 Depth transducer
7 Fluxgate Compass No longer supported
8 Raymarine wind transducer or Rotavecta
9 Speed and sea temperature transducer

  iTC 5 extended system  
  EXTENDED SEATALKNG SYSTEM WITH iTC-5
Part Number Description
1 ST70 Instrument display
2 p70r Pilot Controller
3 i70 Instrument display
4 AIS tranceiver
5 SPX course computer (supplying 12 V power to SeaTalkng network)
6 Man Over Board (MOB)
7 SeaTalkng 5-way connector
8 Rudder reference transducer (connected via SPX)
9 Fluxgate Compass (connected via SPX) no longer supported
10 Multifunction display with built in GPS
11 SeaTalk to SeaTalkng converter
12 iTC-5
13 Terminated iTC-5
14 Trim tabs
15 Engine data (connected via devicenet adaptor)
16 Terminated SeaTalkng 5-way connector
17 Depth transducer
18 Speed and sea temperature transducer
19 Raymarine wind transducer or rotavecta
iTC-5 Specifications
  iTC 5 front
  GENERAL SPECIFICATIONS
Product Number E70010
Nominal supply voltage 12 V dc
Operating voltage range 9 - 16 V dc
Current <150 mA peak operating current
Power consumption Typical: 1.5 W
Environmental Installation environment:
Operating temperature = 5ºf to +131ºF (-15ºC to +55ºC)
Storage temperature = -13ºF to +158ºF (-25ºC to +70ºC)
Relative humidity: max 95% Splash proof to IPX2
Data connections SeaTalkng backbone
1 x SeaTalkng spur
5 x transducer connections with spade terminals
Conformance Europe: 2004/108/EC
Australia and New Zealand: C-Tick Compliance Level 2
Documents
iTC-5 Ordering Information
  iTC 5 front  
  ORDERING INFORMATION
Part No. Description
E70010 iTC-5 Instrument Transducer Converter
A80002 iTC-5 Cover Spare

iTC-5 - What's in the box?

The iTC-5 is available with the features, options, and accessories described below.
Refer to the packing list enclosed with your iTC-5 shipment to determine the actual contents of your package.

iTC 5 icon (1)

iTC-5

Quick Start Guide

Documentation Pack - Manual Number: 87138

screws icon

Fixing screws x 2 - No.6 x ¾ Pan Head Pozidriv, Stainless Steel

spur cable icon

400mm SeaTalkng spur cable - A06038

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây